EasyManuals Logo

Captron CHT3 Series User Manual

Captron CHT3 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Technical specifications
Operating voltage 24 V (16.8 to 32 V)
Load current max. 400 mA
Output pulse
dynamic
static
Approx. 300 ms
Corresponds to operating time
Reverse polarity protection Protection of all cables/lines
Short circuit protection Protected against short circuit and overload
Voltage drop max. 3 V at 400 mA
Power consumption at 24 V
with vibration
max. 30 mA
max. 130 mA
Operating temperature
dynamic
static
-30 °C (-22 °F) … +80 °C (176 °F)
0 °C (32 °F) … +55 °C (131 °F)
Degree of protection IP Front IP69K
Type of actuation Capacitive
Actuation force No actuation force required
max. altitude 2000 m above sea level with "CSA listing"
Relative air humidity max. 95%, non-condensing
Connection options
Plug
CHT3-_5_ …
Plug M8, 4-pin
CHT3-_5_ …
Plug M8, 5-pin

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Captron CHT3 Series and is the answer not in the manual?

Captron CHT3 Series Specifications

General IconGeneral
BrandCaptron
ModelCHT3 Series
CategorySwitch
LanguageEnglish