Need help?Do you have a question about the Capture CA-SC-20200B and is the answer not in the manual?
General| Scan Rate | 200 scans per second |
|---|---|
| Interface | USB, RS-232 |
| Connectivity | USB |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
Identifies key components of the scanner like indicators, trigger, and scan window.
Details connection methods for RS232 Serial, USB HID, and USB COM interfaces.
Covers presentation sensitivity and background lighting adjustments for the SmartStand.
Explains Trigger Mode (standby) and Presentation Mode (auto-scan).
Details Alternative Mode (timed light) and Level Mode (decode-based light).
Explains Force Mode (continuous light) and Toggle Mode (switch-activated light).
Covers Diagnostic, Low Power (idle state), and Multiple Read modes.
Defines suffix settings for keyboard interface, like None, TAB, ENTER, RETURN, SPACE.
Lists available keyboard layouts for different countries and regions.
Configures record suffixes, baud rates, and data frame parameters for serial communication.
Covers system information, factory defaults, and user default settings.
Details configuration options for RS232 Serial, USB HID, and USB COM interfaces.
Explains how to enter and exit programming mode using specific bar codes.
Lists and explains numerical and alphabetical option codes for configuration.
Configures keyboard layout, record suffixes, preamble, and postamble.
Adjusts intermessage/intercharacter delays, and configures function/keypad emulation.
Manages upper/lower case settings and caps lock release behavior.
Controls STX/ETX transmission, record suffixes, and preamble/postamble.
Sets handshaking protocols and intermessage/intercharacter delays.
Configures serial response time-outs and NAK retry counts.
Table detailing ANSI, ASCII, Key Function, and Ctrl Output mappings.
Reference table for HEX and ASCII values of various characters and commands.
To Next Page