Cardin 200/BL224E - User Manual

ZVL474.03 Mod: 07.09.2016
ACHTUNG! Bevor mit der Installation begonnen wird, sollte
die Anleitung aufmerksam gelesen werden!
Anlagenart Seite 2
Montagegearbeiten Seiten 3-5
Elektrischer Schaltplan (Anlagenart) Seite 6
Wichtige Hinweise Seite 31
Installationsanleitung Seiten 31-32
Manuelle Entriegelung Seite 32
Elektrischer Anschluss Seiten 32-33
Programmierverfahren Seite 34-36
Neupositionierung Seite 36
Funkbefehl Seite 36
Betriebsmodus Seiten 37
Batteriebetrieb Seite 37
Technische Eigenschaften Seite 48
ITALIANO
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ATTENTION! Before installing this device read the
following instructions carefully!
Installation example Page 2
Assembly Pages 3-5
Wiring diagram (installation example) Page 6
Important remarks Page 15
Installation instructions Pages 15-16
Manual release mechanism Page 16
Electrical connection Pages 16-17
Programming procedure Page 18-20
Repositioning Page 20
Remote control Page 20
Function modes Pages 21
Battery powered operation Page 21
Technical specications Page 48
ATTENTION! Avant de commencer la pose, lire
attentivement les instructions!
Exemple d’installation Page 2
Schéma de montage Pages 3-5
Schéma électrique (exemple d’installation) Page 6
Consignes importants Page 23
Instructions pour l’installation Pages 23-24
Déverrouillage manuel Page 24
Branchement électrique Pages 24-25
Procédé de programmation Page 26-28
Repositionnement Page 28
Commande via radio Page 28
Modes de fonctionnement Pages 29
Fonctionnement à batterie Page 29
Caractéristiques techniques Page 48
ATTENZIONE! Prima di iniziare l'installazione leggere le
istruzioni attentamente!
Esempio di installazione Pagina 2
Schema di montaggio Pagine 3-5
Schema elettrico (impianto tipo) Pagina 6
Avvertenze importanti Pagina 7
Istruzione per l’installazione Pagine 7-8
Sblocco manuale Pagina 8
Collegamento elettrico Pagine 8-9
Procedura di programmazione Pagina 10-12
Riposizionamento automatico Pagina 12
Comando via radio Pagina 12
Modalità di funzionamento Pagine 13
Funzionamento a batteria Pagina 13
Caratteristiche tecniche Pagina 48
¡ATENCIÓN! Antes de iniciar la instalación del sistema,
leer atentamente las instrucciones.
Instalación estándar Página 2
Esquema de montaje Páginas 3-5
Esquema eléctrico (instalación estándar ) Página 6
Advertencias importantes Página 39
Instrucciones para la instalación Páginas 39-40
Desbloqueo manual Página 40
Conexionado eléctrico Páginas 40-41
Procedimiento de programación Página 42-44
Reposicionamiento Página 44
Mando vía radio Página 44
Modalidad de funcionamiento Páginas 45
Indicaciones en el display Página 45
Datos técnicas Página 48
AUTOMAZIONE PER CANCELLI A BATTENTE
AUTOMATION FOR HINGED GATES
AUTOMATISME POUR PORTAILS BATTANTS
DREHTORANTRIEBE
AUTOMATIZACIÓN PARA CANCILLAS BATIENTES
Questo prodotto è stato testato e collaudato nei laboratori della casa costruttrice, la quale ne ha verificato la
perfetta corrispondenza delle caratteristiche con quelle richieste dalla normativa vigente. This product has been
tried and tested in the manufacturer's laboratory who have verified that the product conforms in every aspect to
the safety standards in force. Ce produit a été testé et essayé dans les laboratoires du fabriquant. Pour l'installer
suivre attentivement les instructions fournies. Dieses Produkt wurde in den Werkstätten der Herstellerfirma
auf die perfekte Übereinstimmung ihrer Eigenschaften mit den von den geltenden Normen vorgeschriebenen
getestet und geprüft. Este producto ha sido probado y ensayado en los laboratorios del fabricante, que ha
comprobado la perfecta correspondencia de sus características con las contempladas por la normativa vigente.
BL
24Vdc
Motors
Model
Date
Instruction manual
Series
BL
224E
13-09-2005
ZVL474.03
CARDIN ELETTRONICA spa
Via del lavoro, 73 – Z.I. Cimavilla
31013 Codognè (TV) Italy
Tel: +39/0438.404011
Fax: +39/0438.401831
email (Italian): Sales.office.it@cardin.it
email (Europe): Sales.office@cardin.it
Http: www.cardin.it
S
4
4
9
-
-
-
S
4
8
6
-
-
-
S
5
0
8
-
-
-
S
5
0
4
-
-
-
Multi
Decoding
200/BL224E
24 Vdc Motors
(firmware V1.0)

Summary

Cardin 200;BL224 E Automation System

Installation Example and Diagram

Visual guide showing the system's installation layout and component placement.

Assembly and Mounting Instructions

Detailed steps for physically assembling and mounting the gate automation hardware.

Limits of Use

Defines operational constraints, angles, and dimensions for the gate automation system.

Manual Release Mechanism

Procedure for manually releasing and operating the gate automation in case of power failure.

Electrical Wiring Diagram

Detailed electrical wiring schematic for the gate automation system installation.

Important Safety Instructions

Critical safety guidelines and essential operational notes for secure system installation and use.

Electrical Connection

Step-by-step instructions for connecting the electrical components of the automation system.

Programming Procedure

Guide to configuring system functions, parameters, and settings via the electronic programmer.

Remote Control Operation

Instructions for managing and memorizing remote control transmitters for system operation.

Battery Powered Operation

Details on how the system operates using battery power and its charging mechanism.

Technical Specifications

Provides detailed technical data and specifications for the gate automation operator and control unit.

Cardin 200/BL224E Specifications

General

Motor Voltage	230 Vac
Operating Temperature	-20°C to +55°C
Protection Level	IP44
Motor Type	Electromechanical
Safety Features	Obstacle detection