To Next PageTo Next Page
Need help?Do you have a question about the Cardin EVO2000 and is the answer not in the manual?
Lists components of the gearmotor as shown in Figure A.
Provides specifications for the EVO2000 gearmotor.
Details the installation and function of magnetic limit switches.
Lists and describes components of the control unit.
Explains the role and detection of the encoder.
Outlines operation and programming of the OC2 receiver.
Details the setup and function of the photo test.
Explains force testing and adjustment according to standards.
Describes the gradual start feature and its bypass.
Details how to set a partial gate opening for pedestrians.
Explains how to select normal or enhanced deceleration.
Details how to adjust the pause time between cycles.
Lists components of the gearmotor as shown in Figure A.
Provides specifications for the EVO2000 gearmotor.
Details the installation and function of magnetic limit switches.
Lists and describes components of the control unit.
Explains the role and detection of the encoder.
Outlines operation and programming of the OC2 receiver.
Details the setup and function of the photo test.
Explains force testing and adjustment according to standards.
Describes the gradual start feature and its bypass.
Details how to set a partial gate opening for pedestrians.
Explains how to select normal or enhanced deceleration.
Details how to adjust the pause time between cycles.
General| Motor Voltage | 230 Vac |
|---|---|
| Operating Temperature | -20°C to +55°C |
| Protection Level | IP54 |
| Power Supply | 230V AC, 50Hz |
| Safety Features | Obstacle detection |
