OPTION: Long screws (J) maybe be used to attach the gate to the stud through the drywall.
2. Install second screw (C) in top of hinge bracket securing it tothe wall.
3. Insert eyebolts with nut and washer (E) into the top and bottom of the hinge side gate (side with three holes). Be
sure nuts are tight. Do not use the middle hole for this step.
4. Hang gate by inserting hinge rod ( B), through the top of mounted hinge bracket ( A), through upper plastic
shoulder washer (F), through both eye bolts, through lower plastic shoulder washer ( F), and finally through the
bottom of the hinge bracket. To secure the hinge, insert keyring ( I) through a hole in the end of the hinge rod.
To Next Page
Loading...
