Cardio Zone Treadmill - P1~P6 Program Control Function

- 12 -
to make sure.
8.3. After selecting the grade,
TIME
will blink. At this time press or
to change time. After setting time, press
to make sure.
TIME
window
then stop blinking.
**Time preset value
：
25(min)
Range of time
：
5~99(min)
8.4. Press
, the treadmill will operate according to the preset value of Program. It
has 15segments of speed and incline changing. The changing style adopts 15
segments rotative change. The preset value of the first segment time is 2 minutes.
Anon each time is 1 minute. When time is over, the value of speed and incline angle
will change directly (during operating press or
to control
increase/decrease speed
)
8.5. During setting function of
P1~P6,
if press
, the treadmill will start at once.
The system will use preset values which have not been set. Press or
to change the preset value of
PROGRAM.
But next segment will come
back to original value of
PROGRAM.
8.6. In this treadmill, P1is a special program and below is its means:
P1 9 HOLE
：
3500m is the benchmark of this program. When you finish 3500m
according to program, then the program is finished and the treadmill will stop. This
mode imitates the landform of golf course. The difficulty is decided by change grade
of upgrade and downgrade.
8.7. In each PROGRAM, before starting L1~L3, there is 1minute to warm up. At time,
the segment starts according to starting speed of each level.