- 11 -
press the second time and hold it for 3 seconds, it will
Reset
to the
Start/Ready status. )
**Range of Speed
：
1.0~10 mph
，
Step is 0.1 mph
Range of Angle
：
0~15 Level
，
Step is 1 Level
4. A t Start/Ready status, press
to enter into other function.
5. Except press the buttons on the computer to select angle and speed, the handrail
keys can also be used to adjust angle and speed. The left keys are used to adjust
angle and the right keys are used to adjust the speed.
** If the safety key is not placed in the recess, all the windows will display “-------”,
which means the treadmill has not entered the Start/Ready status.
MODE Function Keys
6. Press under Start/Ready status, the MANUAL LED begin to blink, at this
time you have entered the Function Selection Mode, press or to
switch light from
P1
to
P6
and MANUAL.
7.
MANUAL
Function
：
7.1. When
MANUAL
light blinking, press
and
MANUAL
light will stop
blinking. Keep on lighting and
TIME
LED will blink. At this time, you can adjust
time.
7.2. Press then the motor will start directly at the speed of
1.0 mph.
At the time
you can press or
to control the incline angle and the speed.
8.
P1~P6 Program Control Function (every
PROGRAM
has 15 parts)
8.1. When
MANUAL
LED blinking, press or
to select what you
want. When the LED of
P1~P6
blinking, press
to make sure. After entering
Program Control Function, the indicator light which means it will keep on.
8.2. At this time
CALORIES
window will display acute series (L1~L3) of exercise. You
can press or
to change the grade you want then press
To Next Page
Loading...
