4.2 STATUS LIGHTS
None scala rider is OFF
1 BLUE ash every 3 seconds Standby mode – No active audio
2 BLUE ashes every 3 seconds
Active mode – Call in progress /
music or other audio source is ON
1 RED ash every 3 seconds Standby mode – Battery is low
2 RED ashes every 3 seconds Active mode – Battery is low
Solid PURPLE USB connected
Solid RED Charging
4.3 AUDIO SOURCES AND PRIORITIES
If two connected audio sources try to play audio simultaneously,
your scala rider G9 automatically determines which audio
source to play through the speakers based on the priority of the
connected devices.
Higher Priority
1. Mobile Phone or GPS instructions
*
2. Intercom
3. A2DP (Stereo Bluetooth) audio
4. FM Radio (Built-in)
5. AUX (for corded connection i.e. Music Players)
*GPS instructions from Smartphone GPS Apps are
prioritized like A2DP audio
Lower Priority
A2DP audio priority can be congured to be higher than Intercom.
See section 3 to adjust settings.
• Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
• Click-to-Link, Intercom and “1+8” calls have the same priority:
Click-to-Link requests will not interrupt any type of Intercom call in
progress, and vice-versa
4.4 VOICE COMMAND
The scala rider G9 allows you to perform certain actions by simply
using your voice. Using advanced Voice Recognition, you can
control the scala rider G9 completely handsfree.
The default Voice Command language is English. Other languages
are also available (see section 3 to adjust settings).
Throughout this manual, features which are available via Voice
Command are marked with the icon.
1. With no call in progress, tap v or speak any word loudly to
activate VOX
2. Speak a Voice Command from the table below:
Current Mode Desired Action Say this:
Standby / FM /
A2DP / AUX
“1+8” Intercom Call* <<Buddy Name>>*
Intercom call with A or B “Call Intercom”
Standby
Start A2DP “Music ON”
Turn on FM “Radio ON”
FM Radio
Turn o FM “Radio OFF”
Next Station Preset “Next Station”
Previous Station Preset “Previous Station”
A2DP Music
Stop / Pause A2DP “Music OFF”
Next Track “Next Track”
Previous Track “Previous Track”
*see Section 5.1 for details
6
| scala rider
®
G9 / G9 PowerSet