53
Intended Use
The Micro I Spirometer is intended to measure the maximal volume
and flow of air that can be moved out of a patient’s lungs. The system
is intended for use with Paediatric and adult patients over the age of 3
years in hospitals, physician offices, laboratories and occupational
health testing environments.
Environment
Please observe the following precautions:
Avoid exposing the Micro I to direct sunlight.
Avoid operating the spirometer in dusty conditions or near to
heating appliances or radiators.
Do not keep the spirometer in a damp place or expose it to
extreme temperatures.
Do not direct the transducer holder towards a strong light
source whilst operating the spirometer.
Getting Started
It is recommended that Micro I spirometer is fully charged before use.
The power supply is provided with separate UK, USA and European
plugs. Connect the required plug to the power supply and plug in to a
mains outlet. Connect the Micro I to the power supply using the
USB/charging cable and the charging symbol will appear on the
screen.
Fully charge for a minimum of 5 hours when used for the first
time.
Remove the protective film from the display screen before use.
To Next Page
Loading...