EasyManua.ls Logo

CareFusion Micro I - Safety Designation Per IEC 60601-1

CareFusion Micro I
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
Safety Designation per IEC 60601-1
Type of protection against
electrical shock
Class II
Degree of protection against
electrical shock
Type B applied part
Supply connection 100-240 VAC, 50/60Hz
Power Equipment Adapter and rechargeable
internal NiMH battery.
Battery life: Approximately 30 hours with
a fully charged new battery.
Degree of Electrical connection
between equipment and Patient
Equipment designed as non-
electrical connection to the
patient.
Degree of mobility Transportable
Mode of operation Continuous
NOTE: When you connect other equipment to the unit, always make
sure that the whole combination complies with the international safety
standard IEC 60601-1 for medical electrical systems. When
connecting to a PC with the supplied USB lead then the PC must be
EN 60601-1 / ANSI/AAMI ES60601-1:2005 compliant.
IMPORTANT: Only use the mains adapter supplied (36-PSU1017 5V
DC 1.2A). The adapter contains a transformer. Do not cut off the
adapter to replace it with another plug as this causes a hazardous
situation.
• The adapter transforms the mains voltage (100-240 Volts) to a safe
voltage (5V DC)
• Make sure the adapter does not get wet
• Do not use a damaged adapter
• Always unplug your Micro I before cleaning
WARNING: Do not connect devices that are not specified as part of
the system.
WARNING: No modification of this equipment is allowed.

Table of Contents