Carel Hecu CO2 - 4. MENU DESCRIPTION; Navigating the Hecu CO2 Main Menu

20
ENG
Hecu CO
2
+0300085EN rel. 2.2 - 07.05.2019
4. MENU DESCRIPTION
4.1 Main menu
To navigate the menu tree, use the following
buttons:
• & : navigate sub-menus, screens and
ranges of values and settings;
• : confi rm and save the changes made;
• : return to the previous menu
A.Unit Status
a.Main Info
b.Setpoint
c.ON/OFF
B.Input/Output
a.Status a.Dig.In.
b.Analog In.
c.Dig.Out
d.Analog Out
b.Manual man. a.Dig.Out
b.Analog Out
c.usc.BLDC
d.vacuum
c.Test a.Dig.Out
b.Analog Out
C.Compressors
a.MT/LT compr.
b.PAR compr.(ONLY LT)
a.I/O status
b.
Regulation
c.Op. hours
d.Energy save
e.Alarms
f.Configuration
g.Advanced
D.Condensers
a.I/O status
b.Regolation
c.EEV
d.Energy save
e.Alarms
f.Configuration
g.Advanced
E.Evaporators
a.Stato I/O
b.Configuration
c.Regulation
d.EVD driver
F.Other
functions
a.Oil a.I/O status
b.Settings
b.defrost a.I/O status
b.Settings
c.info
c.Economizer a.I/O status
b.Regulation
d.Injection a.I/O status
b.Regulation
e.Heat recovery a.I/O status
b.Regulation
f.Gen. functions a.Stages
b.Modulation
c.Alarms
d.Time bands
e.I/O status
g.Chillbooster a.I/O status
b.Regulation
h.Transcritical a.I/O
b.Settings
c.EVOsettings
i.DSS a.I/O status
b.settings
G.Configura-
tions
a.Clock a.Time bands
b.Settings
b.Language
c.BMS
d.Fieldbus
e.Password
H.Safety
a.History
b.Prevent
c.Alarm configuration
I.Info
L.Setup
a.Pre-configuration not available
b.Wizard
c.Advanced config. not available
d.Default