Need help?Do you have a question about the Carel MPXone AX3000PS20030 and is the answer not in the manual?
General| Digital inputs | 8 |
|---|---|
| Analogue inputs | 2 |
| Relay outputs | 3 |
| Frequency | 50/60 Hz |
| Protection Degree | IP20 |
| Power supply | 24 VAC/VDC |
| Serial ports | RS485 |
| Input Voltage | 24 VAC/VDC |
| Humidity | 10% to 90% RH (non-condensing) |
Key warnings regarding electronic circuits, temperature, and device handling for all CAREL products.
Critical warnings for installation environments, electrical wiring, and serial port connections.
Guidelines for electrical installation, wiring separation, and serial port connections.
Step-by-step guide for initial setup using the wizard, covering probes and communication.
Using the Applica app for initial configuration, parameter modification, and copying settings.
Detailed explanations of parameters essential for the initial setup of the controller.
Verification steps to ensure correct operation after installation and configuration.
Description of analogue and digital inputs/outputs and how to assign probe functions.
Configuration of defrost types, timing, scheduling, and related parameters.
Control of anti-sweat heaters using PI or fixed activation, and fan modulation.
Managing electronic expansion valves, including PID control, protection functions, and parameters.
Settings for compressor protection, including start delays, minimum times, and defrost priority.
To Next Page
