Carel MPXone AX3000PS20030 - Probe Connection

ENG
2.5
Probe
connection
Note: the probe connections relate to the default parameter configuration.
basic panel
Fig.2.i
medium
Fig.2.j
Fig.2.k
Possible connections
Note: O = GND
2.6
Connection
diagrams
Note: the “APPLICA” application can be used to change the configuration of the probes without
needing to rewire or change the functions of the relays, thus taking advantage of different capacities
when needed.
16|2. Installation
MPXone +0300086EN rel. 1.0– 04.09.2018