Need help?Do you have a question about the Carel MPXone series and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Protection Rating | IP20 |
| Communication Protocol | Modbus RTU |
| Series | MPXone |
| Power Supply | 24 VAC/VDC ±10% |
| Digital Inputs | Configurable |
| Analog Inputs | Up to 4, depending on model |
| Digital Outputs | Configurable |
| Communication | RS485, Modbus RTU |
| Display | LCD |
| Input Voltage | 24 VAC/VDC ±10% |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Relative Humidity | 10% to 90% non-condensing |
| Number of Digital Inputs | Up to 6 |
| Number of Digital Outputs | Up to 5 |
| Number of Analog Inputs | Up to 4 |
| Number of Analog Outputs | 0 |
Provides critical warnings and environmental considerations for controller installation.
Explains the function of each terminal on the controller.
Guidelines for proper electrical wiring and cable management.
Details on connecting serial ports for communication.
General installation procedures and important precautions.
Guides through the initial setup wizard for essential parameters.
Explains how to use the Applica app for controller configuration.
Explains key parameters used during initial commissioning.
Details the controller's analogue and digital inputs and outputs.
Describes various temperature control modes for showcases.
Explains defrost scheduling and types of defrost operations.
Describes the management of electronic expansion valves.
Categorizes the different types of alarms the controller can generate.
A comprehensive table detailing alarm codes and their behavior.
Details parameters related to alarm configuration and activation.
To Next Page
