7. Technical specifications
Panel Din
Physical
specifications
Dimensions See figures
Case Polycarbonate
Mounting panel DIN rail
Ball pressure test temperature 125°C
Ingress protection
IP20 rear
IP65 front
IP00
Front cleaning
Use soft, non-abrasive cloth and neutral
detergent or water
Environmental
conditions
Operating temperature -20T60 °C, <90% RH non-condensing
Storage temperature -40T85 °C, <90% RH non-condensing
Electrical
specifications
Rated power supply
24 Vac/dc, use SELV or PELV power supply, Class
2;
115-230 Vac
Operating power supply voltage 24 Vac/dc, +10% -15% 115-230 Vac, +10% -15%
Input frequency 50/60Hz
Maximum current draw 600 mArms 150 mArms
Min power consumption 400mW
Clock
precision +-50ppm;
min date/time retention after power off
Basic Medium
72 h 6 months
Software class and structure A
Environmental pollution class 3
Class of protection against
electric shock
To be incorporated in class I or II appliances
Type of action and
disconnection
1.C
Rated impulse voltage
115-230V input and relay outputs: 4 kV
24 V input: 0.8 kV
Surge immunity category
115-230V input and relay outputs: 3
24 V input: 2
Control device construction Device to be incorporated
Terminal block Plug-in male-female. Cable size: see “Main board: description of the terminals”
User interface
Buzzer built-in
not included on the controller, built-in on the user
terminal
Display
built- in, 3 digits, decimal point, and multi-
function icons
Connectivity
NFC
Max distance 10mm, variable according to the
mobile device used
not included on the controller, built-in on the user
terminal
Bluetooth Low Energy
Max distance 10m, variable according to the
mobile device used
BMS serial interface Modbus RS485, not opto-isolated
FieldBUS serial interface Modbus over RS485, not opto-isolated, maximum number of devices that can be connected: 20
HMI interface not featured Modbus RS485, not opto-isolated
Analogue inputs
(Lmax=10 m)
S1, S2, S3: NTC / PT1000
NTC:
resolution 0.1°C; 10kΩ @ 25°C, error:±1°C in the range -50T50°C, ±3°C in the range 50T90°C;
PT1000:
resolution 0.1°C; 1kΩ @ 0°C; error: ±1°C in the range -60 to +120°C
0...5Vrat:
error 2% fs, typical 1%
4-20 mA:
error 5% fs, typical 1%
0-10 V:
error 2% fs, typical 1%
S4, S5: 0-5 Vrat / 4-20 mA / NTC
(Medium version)
S6: NTC / PT1000 / 0-5 V rat / 0-10
V / 4-20 mA
(Medium version)
Digital inputs ID1, ID2, ID3, ID4, ID5
Voltage-free contact, not opto-isolated
96|7. Technical specifications
MPXone +0300086EN rel. 1.0– 04.09.2018
To Next Page
Loading...