Panel Din
closing current, 6 mA typical
open contact voltage 13 V
contact resistance max 50 Ω.
Analogue
outputs
Y1, Y2
0-10 V:
10 mA max
PWM 100 Hz:
max amplitude 10 V: 10 mA max
Digital outputs
NO1 (16 A), NO2 (8 A), NO3 (5 A),
NO4 (5 A)
Note: NO1+NO2+NO3 cannot
exceed 15 A max.
16 A:
EN60730: 15 A resistive, 250 V, 100k cycles;
UL60730: 15 A resistive, 240 Vac, 100k cycles; Pilot duty B300, 6k cycles
8 A:
EN60730: 5 A resistive, 250 Vac, 100k cycles; 5(4), 250 Vac, 100k cycles; 4(2), 250 Vac, 100k cycles
UL60730: 10 A resistive, 250 Vac, 100k cycles; 2 FLA, 12 LRA, 250 Vac, 30k cycles
5 A:
EN60730: 5 A resistive, 250 Vac, 50k cycles; 4(1), 230 Vac, 100k cycles; 3(1), 230 Vac, 100k cycles
UL60730: 5 A resistive, 250 Vac, 30k cycles; 1 FLA, 6 LRA, 250 Vac, 30k cycles; Pilot Duty C300, 30k cycles
Probes and
terminal power
supply
5V
5 Vdc ± 2% to power the 0 to 5 V ratiometric probes.
Maximum current delivered: 10 mA protected against short-circuits
+V
8-11 V to power the 4-20 mA current probes.
Maximum current delivered: 25 mA protected against short-circuits
VL 13 Vdc ± 10% to power the remote display
HMI power supply not featured 13 Vdc ± 10% to power the user terminal
Cable lengths
Analogue inputs/outputs, digital
inputs/outputs, probe power
<10 m
if using the VL power supply in domestic
environments, the maximum cable length is 2
m.
<10 m
with 115 Vac power supply, if using +V in domestic
environments, the maximum cable length is 2 m.
BMS and Fieldbus serial cables <500m with shielded cable
Conformity
Electrical safety
EN/UL 60730-1
EN/UL 60335-1
Electromagnetic compatibility
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EAC
Applications with flammable
refrigerant gases
EN/UL 60079-15
EN/UL 60335-2-34
EN/UL 60335-2-40
EN/UL 60335-2-89
Wireless compliance
RED
FCC
IC
Tab.7.a
To Next Page
Loading...