Carel MPXone series - Connector;Cable Table

ENG
7.1
Connector/cable
table
Ref. Description Wiring terminals
Wire cross-
section
(mm
2
)
Lmax
(m)
J1 Controller power supply
Panel model: plug-in terminal, screw, 2-pin,
pitch 5.08
0.5-1.5 10
DIN rail model: plug-in terminal, screw, 2-pin,
pitch 5.08
1.5 10
J2
Inputs S1, S2, S3, S5, ID1, ID2; outputs
Y2, Y2
10-pin Microfit crimp connector
0.05- 0.52 (20- 24
AWG)
10
J3 Inputs S4, S6, ID3, ID4. ID5 8-pin Microfit crimp connector
0.05- 0.52 (20- 24
AWG)
10
J4 BMS Plug-in screw terminal, 3-pin, pitch 3.81 0.081-1.31 500
J5 Fbus Plug-in screw terminal, 3-pin, pitch 3.81 0.081-1.31 10
J6 Outputs NO1, NO2, NO3, NO4 Digital outputs (16 A, 8 A, 5 A) 10
J7 Output NO5 Digital output (5 A) 10
J8 HMI remote terminal Coded connection cable (see “Introduction”)
Tab.7.b
98|7. Technical specifications
MPXone +0300086EN rel. 1.0– 04.09.2018