(*)
(*) Cavo schermato AWG 20/22 max. 10 m
Shielded cable AWG 20/22 max. 33 ft
Fig. 10
CAREL INDUSTRIES HQs
Via dell’Industria, 11 - 35020 Brugine - Padova (Italy)
Tel. (+39) 0499716611 – Fax (+39) 0499716600
+050001800 - rel. 1.1 - 20.03.2013
IMPORTANT WARNINGS
The CAREL product is a state-of-the-art device, whose operation is specifi ed in the technical documentation supplied with the product
or can be downloaded, even prior to purchase, from the website.
The customer (manufacturer, developer or installer of the fi nal equipment) accepts all liability and risk relating to the confi guration of the
product in order to reach the expected results in relation to the specifi c installation and/or equipment. The failure to complete such pha-
se, which is required/indicated in the user manual, may cause the fi nal product to malfunction; CAREL accepts no liability in such cases.
The customer must use the product only in the manner described in the documentation relating to the product. The liability of CAREL in
relation to its products is specifi ed in the CAREL general contract conditions, available on the website and/or by specifi c agreements
with customers.
Disposal of the product
The appliance (or the product) must be disposed of separately in accordance with the
local waste disposal legislation in force
NO POWER
& SIGNAL
CABLES
TOGETHER
READ CAREFULLY IN THE TEXT!
Separate as much as possible the probe and digital input signal cables from the ca-
bles carrying inductive loads and power cables to avoid possible electromagnetic disturbance.
Never run power cables (including the electrical panel wiring) and signal cables in the same conduits.
To Previous Page
Loading...
