Need help?Do you have a question about the Carel HUMISTEAM and is the answer not in the manual?
General| Power Supply | Single or Three Phase (depending on model) |
|---|---|
| Installation | Wall-mounted or floor-standing |
| Power consumption | Depends on model and capacity |
| Water connection | 3/4" |
| Max. water pressure | 10 bar |
| Operating temperature range | 5°C to 40°C |
| Dimensions (HxWxD) | Varies by model |
| Weight | Varies by model |
| Water Supply | Potable Water |
Read and follow safety standards before installation or handling.
Explains the 10-character model code structure and its meaning.
Detailed identification and diagrams of humidifier components.
Instructions for checking integrity and proper storage of the humidifier upon receipt.
Guidance on selecting the best location for steam distribution and installation.
Instructions for securely fastening the humidifier unit to the wall using screws.
Step-by-step instructions for removing and reattaching the front cover of the unit.
Defines the required characteristics and limits for supply water quality.
Describes the properties of the drain water, including temperature and flow rate.
Details on connecting the water supply and drain pipes to the unit.
Illustrates the hydraulic connections for water supply and drain.
Checks to ensure correct hydraulic connections are made.
Using ventilated distributors for direct steam distribution into environments.
Humidifying cold rooms using specific distributors and operating within limits.
Using linear and OEM distributors for steam distribution in air ducts.
Guidelines for positioning linear distributors within air ducts for optimal performance.
Instructions for installing the steam pipe, including layout and connection.
Guidance on installing the condensate return pipe to prevent gurgling and efficiency loss.
Checks to ensure correct installation of the steam pipe and associated components.
Table detailing electrical data, power input, and steam production for various models.
Procedure for checking the voltage of the multi-voltage auxiliary circuit transformer.
Details on the main control board, including terminal blocks and connections.
Explains how to connect external signals for ON/OFF and proportional control.
Information on alarm contacts, dehumidification contacts, and remote terminal connections.
Checks to confirm correct electrical connections have been made as per diagrams.
Provides the single-phase wiring diagram for 1-5 kg/h humidifiers with a P controller.
Provides the single-phase wiring diagram for 1-5 kg/h humidifiers with an H controller.
Provides the three-phase wiring diagram for 3-15 kg/h humidifiers with P controllers.
Provides the three-phase wiring diagram for 3-15 kg/h humidifiers with H controllers.
Provides the three-phase wiring diagram for 25-65 kg/h humidifiers with H controllers.
Provides the three-phase wiring diagram for 25-65 kg/h humidifiers with P controllers.
Essential warnings before starting the unit, including checking for leaks and ensuring electrical parts are dry.
List of checks to perform before starting the humidifier to ensure proper installation and operation.
Detailed steps for starting the unit, including procedures for new and empty cylinders.
Description of the two types of electronic controllers (P and H) and their functionalities.
Instructions for safely shutting down the humidifier for seasonal storage or maintenance.
Parameters are grouped into three levels: Set Point, Control Parameters, and Configuration Parameters.
Procedure for reading and setting the ambient humidity set point using the control panel.
Details on reading and setting control parameters and measurements related to humidification.
Instructions for setting configuration parameters for essential humidifier functions.
Procedure to restore the controller to its factory default settings.
Overview of the remote control's features, buttons, and versions.
Instructions for accessing and modifying parameters using the remote control.
How to exit the programming phase, with or without saving modifications.
Detailed instructions and warnings for replacing the steam production cylinder.
Guidance on maintaining components like electrovalves, manifolds, and tanks.
Information on replacing fuses, including ratings and model compatibility.
Lists standard and special spare parts for single-phase and three-phase humidifiers.
Describes alarm indications and behavior on P controllers.
Describes alarm indications and behaviors on H controllers, including error codes.
Comprehensive table detailing alarm codes, causes, solutions, and actions for P and H controllers.
Provides solutions for common humidifier problems and fault conditions.
Explains the basic principle of humidity production using electrodes and water heating.
Details ON/OFF and proportional control principles for P and H controllers.
Describes functions like conductivity measurement, automatic draining, anti-foam, and dehumidification.
Provides physical dimensions and weight specifications for various humidifier models.
Details the technical specifications of the infrared remote control unit.
Lists technical specifications for ventilated steam distributors used with different humidifier models.
To Next Page
