EasyManua.ls Logo

Carel MRK0000000 User Manual

Carel MRK0000000
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
µRack
Standard compressor racks single/two circuit
User manual
NO POWER
& SIGNAL
CABLES
TOGETHER
READ CAREFULLY IN THE TEXT!

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Carel MRK0000000 and is the answer not in the manual?

Carel MRK0000000 Specifications

General IconGeneral
BrandCarel
ModelMRK0000000
CategoryController
LanguageEnglish

Summary

Safety and Environmental Information

Product Overview

User Interface

Starting the Unit

Compressor Management

General Settings

Parameters for ON/OFF control, number of compressors, and type of control.

Compressor Rotation

Methods for balancing compressor operating hours and starts (LIFO, FIFO, Time).

Compressor Control

Details on proportional band and dead band control for compressor activation/deactivation.

Compressor Dead Band with Variable Times

Setting variable times for compressor activation/deactivation based on pressure changes.

Compressors with Different Capacities

Managing compressors with varying kW ratings for finer control and capacity matching.

Compressor Time Settings

Parameters defining time intervals for compressor operations like ON/OFF and start/stop delays.

Fan and Inverter Management

Fan Management

Controlling fan operation based on discharge pressure and managing fan steps.

Fan Control

Proportional band and dead band control methods for fan operation.

Inverter Management

Configuration and control of fan speed using an inverter, including set points and speed-up times.

PWM-PPM Management

How the controller generates PWM signals for fan speed control and related modules.

Various Settings

Prevent High Discharge Pressure

Enabling a prevention function to gradually decrease unit capacity before high pressure shutdown.

Alarm Management

Alarms with Automatic Reset

Handling alarms that automatically reset when the condition is resolved.

Alarms with Manual Reset

Handling alarms that require manual intervention to clear.

Supervisor Network and Communication

User Interface Parameter Protection

List of Parameters

Unit Configuration Parameters

Detailed parameters for unit model, compressor/fan configuration, and input/output settings.

Probe and Alarm Configuration Parameters

Parameters for probe types, calibration, alarm thresholds, and password management.

Supervisor Management

Default Configurations

Technical Specifications

Product Codes List

Application Diagrams

Related product manuals