30
+--------------------+ Setting of Energy Saving set-point/differential.
¦-- Temperature AL¦
¦Energy Saving ¦
¦Set-point :00.0 _C¦
¦Differential:00.0 _C¦
+--------------------+
SA (USER BRANCH)
+--------------------+ Setting of High/Low water temperature alarm
¦Water Temperature AL¦ thresholds.
¦Alarm Threshold ¦
¦High Temp.: 00.0 _C¦
¦Low Temp. : 00.0 _C¦
+--------------------+
COMPENS1 (USER BRANCH)
+--------------------+ Setting of external air set-point for Energy
¦- Compensation AL¦ Saving.
¦Set Point External ¦
¦Air Temperature: ¦
¦ 00.0 _C: ¦
+--------------------+
COMPENS2 (USER BRANCH)
+--------------------+ Setting of compensation percentage.
¦-- Compensation AL¦
¦Compensation ¦
¦Percent. Regulation ¦
¦ 000 U%: ¦
+--------------------+
COMPENS3 (USER BRANCH)
+--------------------+ Setting of the type of compensation whether Direct
¦-- Compensation AL¦ or Reverse.
¦Type of Compens. ¦
¦ ¦
¦ DIRECT ¦
+--------------------+
UMID12 (USER BRANCH)
+--------------------+ Setting of the humidity proportional band.
¦-- Humidity AL¦
¦Setting of ¦
¦Prop. Differential ¦
¦ 000.0 U% ¦
+--------------------+
UMID40 (USER BRANCH)
+--------------------+ Setting of High/Low humidity thresholds.
¦-- Humidity AL¦
¦Alarm Threshold ¦
¦High : 000.0 U%¦
¦Low : 000.0 U%¦
+--------------------+
RIT_RES (USER BRANCH)
+--------------------+ Setting of delay between the activation of one
¦-- Heaters AL¦ heater and the activation of the next one if two
¦Delay between ¦ heaters have been selected.
¦Heaters Activation ¦
¦ 0000 seconds ¦
+--------------------+
RAMPE2 (USER BRANCH)
+--------------------+ Setting of the values of activation/deactivation of
¦-Modulable Valves AL¦ the cooling valve, if it has been selected.
¦Cooling Valve ¦
¦Start : 000 U%¦
¦End : 000 U%¦
+--------------------+
RAMPE6 (USER BRANCH)
+--------------------+ Setting of the values of activation/deactivation of
¦-Modulable Valves AL¦ the heating valve, if it has been selected.
¦Heating Valve ¦
¦Start : 000 U%¦
¦End : 000 U%¦
+--------------------+
RAMPE23 (USER BRANCH)
+--------------------+ Setting of the values of activation/deactivation of
To Next Page
Loading...
