Carlisle BINKS EV2-15 - EU Declaration of Conformity

EN
This Declaration of conformity / incorporation is
issued under the sole responsibility of the
manufacturer:
F. A. Sutter

Representative authorised to compile the technical
file
Sales and Marketing Director. CFT UK Ltd
1 Avenue de Lattre de Tassigny
94736 Nogent, Cedex. France
Lodging of Technical file
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Suitable for use in hazardous area:
Zone 1
Protection Level:
Ex h IIB T4 Gb X (Pump)
II 2 G Exd/Exde IIB T4 IP55 (Motor) CE0722
II 2 GD ck T4 (Gearbox)
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
EMC Directive 2014/30/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 1127-1:2019 Explosive atmospheres - Explosion prevention - Basic concepts
EN ISO 80079-36:2016 Explosive Atmospheres- Part 36: Non Electrical equipment for explosive atmospheres-
Basic methods and requirements.
EN ISO 80079-37:2016 Explosive Atmospheres- Part 37: Non Electrical equipment for explosive atmospheres -
protection by methods "c", "b" and "k".
EN 60079-0:2018 Explosive atmospheres - Equipment. General requirements
EN 60079-1:2014 Explosive atmospheres - Equipment protection by flameproof enclosures "d"
EN 60079-7:2015 Explosive atmospheres. Equipment protection by increased safety "e"
EN 60034-1: 2010 Rotating electrical machines
Providing all conditions of safe use / installation stated within the product manuals have been complied with and also installed in accordance
with any applicable local codes of practice.
Executive President: En
g
ineerin
g
and
Operations, Scottsdale, AZ, 85254.
USA
This Declaration of conformity / incorporation is issued under the sole responsibility of the
manufacturer:
Product Description / Object of Declaration:
Electric Pump E2-7, E2-15 XXX, E2-20, E2-30, E2-40, E2-
60, EV2-15, EV2-30, E4-60, E4-100
This Product is designed for use with:
Solvent and Water based materials
Element Materials Technology (2812)
Signed for and on behalf of
Carlisle Fluid Technologies
UK Ltd:
5/5/21
Notified body details and role:
EU Declaration of Conformity
77-3337 R2.1 2 www.carlisleft.com