EN
This Declaration of conformity /
incorporation is issued under the sole
responsibility of the manufacturer:
14/1/20
D Smith
Director of Sales (EMEA)
Bournemouth,BH11 9LH,UK
Electric High Pressure Pumps - 104255-LH/RH,
104256-LH/RH (E10-280), 104257-LH/RH, 104258-
LH/RH (E14-210), 104259-LH/RH, 104260-LH/RH
(E20-140).
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 60034-1: 2010 Rotating electrical machines
EN 61000-6-4:2007+A1:2011 Electromagnetic compatability (EMC)Generic standard. Emission standard for
industrial environments
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial
environments
Providing all conditions of safe use / installation stated within the product manuals have been complied with
and also installed in accordance with any applicable local codes of practice.
Product Description / Object of Declaration:
THIS UNIT IS DESIGNED TO BE USED ONLY WITH NON
FLAMMABLE MATERIALS
NON APPLICABLESuitable for use in hazardous area:
This Product is designed for use with:
Protection Level:
Notified body details and role: Element Materials Technology (0891)
Lodging of Technical file
Si
ned for and on behalf of Carlisle Fluid
Technologies UK Ltd:
This Declaration of conformity / incorporation is issued under the sole responsibility of the
manufacturer:
EU Declaration of Conformity
N/A
77-3333 R1.0
2/24
www.carlisleft.com
To Next Page
Loading...