EasyManua.ls Logo

Carlton 12C1000 - User Manual

Carlton 12C1000
56 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

IT 1 EN 5 FR 9
Aflatrice elettrica per catene da motosega Bench chain grinder Meuleuse électrique pour chaînes de scie à moteur
MANUALED’ISTRUZI
ONE
OWNER’SMANUAL MANUELD’UTILISATIONETENTRETIEN
Attenzione: non usare l’apparecchio senza aver letto
il manuale istruzioni.
Attention: do not use the grinder before you have
read the owner’s manual in full.
Attention : ne pas utiliser l’appareil sans avoir
préalablement lu le manuel d’utilisation et entretien.
ES 13 DE 17 NL 21
Aladora eléctrica para cadenas de motosierra Elektrische Schleifmaschine für Motorsägeketten Elektrische kettingslijpmachine
MANUALDEINSTRUCCIONES BEDIENUNGSANLEITUNGEN GEBRUIKSAANWIJZING
Atención: no utilice la unidad sin haber leído el
manual de instrucciones.
Achtung: Vor dem Gebrauch des Geräts unbedingt
diese Bedienungsanleitungen lesen!
Attentie: Gebruik de machine niet voordat u de
gebruiksaanwijzing volledig gelezen heeft.
SV 25 PL 29 RO 33
Elektrisk slipmaskin för sågkedjor Ostrzarka elektryczna do łańcuchów pił motorowych Maşină electrică de ascuţit lanţuri de motoferăstrău
BRUKSANVISNING INSTRUKCJAOBSŁUGI MANUALDEINSTRUCŢIUNI
Observera! Läs igenom bruksanvisningen innan
slipmaskinen används.
Uwaga: nie używać urządzenie bez uprzedniego
przeczytania instrukcji obsługi.
Atenţie: nu utilizaţi aparatul înainte de a citi manualul
de instrucţiuni.
ELECTRIC CHAIN GRINDER

MODEL #12C1000

Table of Contents

Questions and Answers

  • J
    James FloresAug 9, 2025
    Why is my Carlton 12C1000 vibrating abnormally?
    • H
      Helen WheelerAug 9, 2025
      If your Carlton Grinder vibrates abnormally, there could be several reasons: * The grinder might not be secured correctly. Check its attachment and tighten the securing screws. * The arm-motor unit might not be correctly secured to the base unit. Tighten the related blocking handle. * The vise assembly might not be correctly secured to the base unit. Tighten the related blocking handle. * The grinding wheel might not be correctly fitted in its seat on the hub. Dismantle the grinding wheel, check its integrity, and fit it again correctly.
  • E
    elainecarrAug 23, 2025
    What to do if my Carlton Grinder does not start?
    • V
      vaughanjeffreyAug 23, 2025
      If your Carlton Grinder fails to start when switched on, it could be due to a tripped safety device (fuse, circuit breaker, etc.) in the system. Try resetting the safety device. If it trips again, stop using the machine and contact a skilled technician. Alternatively, the machine might not be properly plugged into the outlet. Unplug it and plug it in again correctly.

Carlton 12C1000 Specifications

General IconGeneral
BrandCarlton
Model12C1000
CategoryGrinder
LanguageEnglish

Related product manuals