To Next PageTo Next Page
Need help?Do you have a question about the Carlton 3500D and is the answer not in the manual?
Details on warranty coverage, limitations, and exclusions.
Crucial information regarding warranty validation and engine warranties.
Essential protective gear and practices for safe operation.
Details on starting the engine and monitoring its status.
Explanation of levers for cutter head, tongue, and boom movement.
Procedures for operating the machine via wired remote.
Steps for programming the wireless transmitter and receiver.
Critical safety measures before performing maintenance.
Guidelines for greasing machine components at specified intervals.
Instructions for inspecting, replacing, and arranging cutter teeth.
Procedures for checking oil, replacing filters, and servicing components.
Guidance on replacing and tensioning V-belts and Poly Chain belts.
Steps for replacing jackshaft and cutter wheel bearings.
List of parts for the remote hydraulic system.
Parts breakdown for the lift cylinder.
Parts breakdown for the swing cylinder.
Parts breakdown for the tongue cylinder.
Parts breakdown for the hydraulic pump.
List of parts for the main machine frame.
Parts list for the remote control electrical box.
Parts list for the swing-out boom components.
General safety guidelines for the remote control system.
Precautions for safe handling and operation of remote components.
Key features and capabilities of the remote system.
Physical dimensions and layout of transmitter controls.
Procedures for physically mounting and wiring the receiver.
Instructions for connecting power and signal wires.
Table of receiver status lights and their troubleshooting meanings.
Flowchart for diagnosing receiver issues.
Flowchart for diagnosing transmitter issues.
Guide for verifying communication link between devices.
Advice and best practices for reprogramming the system.
Technical specifications for transmitter and receiver components.
General