10
SETTINGS ADJUSTMENT
DELAY OUT TIME: This button allows modifying the water flow time aer the user removes his hands
from the outlet. A delay out time close to 0 will save more water. An increased delay out time will
make the user experience more comfortable.
If required, the delay out time can be modied as follows:
Press the OUT button. Wait until a quick flashing of the LED in the sensor eye is perceived. Then,
press + to increase the delay out time and – to reduce it.
HOUR HYGIENE FLUSH: This model includes a 24 hours hygiene flush which is disabled. To activate
the hygiene flush, press the clock button. Wait until a quick flashing of the LED in the sensor eye is
perceived. Then press + to activate the hygiene flush. To disable it again, press – to deactivate it.
COMFORT FLUSH: If your model includes a Comfort flush setting, it can be activated by pressing the
flush button. When the button is pressed, one blink of the LED in the sensor eye is perceived. The
pre-programmed flush cycle will take place then.
The Comfort flush cannot be interrupted or deactivated by pressing any button until it is over.
TEMPORARY OFF FUNCTION: This function is ideal to perform any kind of activity in front of the sensor
without operating the system (for example, cleaning).
The outlet will remain shut for 1 minute when this button is pressed once. To cancel this function and
to return to normal operation press the On/O button again or wait 1 minute.
RESET BUTTON: This function restores all the factory settings except for the sensor range. If required,
press the Reset button and without releasing it, press the + button once.
Note: To enter the self adjusting mode, use the ADJ button. To change the sensor range, use the RANGE button.
To Next Page
Loading...
