Caroma G Series - Battery Replacement; Battery Replacement Procedure

11
SECONDS
ABOUT
15
OBJECT
Aer you have replaced the battery, move away from
the sensor range. Wait  seconds in order to allow
the system to set the ideal sensor range. Then aer
the self adjustment has taken place the solenoid
valve will be opened and closed for  second as an
indication that the ideal sensor range was set and
the product is ready for use.
Check that there are no objects in front of the sensor
aer the battery replacement was completed.
Carefully open the dual power input box, using the Allen key provided. Remove the old battery and replace
it with a new V battery (Lithium battery is recommended). Close the box.
IMPORTANT: These models were supplied with a self adjusting sensor.
The ideal sensor range for the specic location will be set automatically again aer changing the battery.
IMPORTANT: Spent batteries should not be disposed of with normal household waste.
Contact your local authority for information on waste disposal and recycling.
BATTERY REPLACEMENT