• After storage or transportation at low temperatures, keep the
appliance in a warm room for two hours before turning it on.
Remove all packaging materials from the appliance.
• Make sure that the accessories of the appliance fit the description,
and that the appliance is not damaged.
• Wipe the body of the appliance with a damp cloth and rinse the
cutting unit under running water. Dry thoroughly before use.
Switch the appliance off using the ON/OFF button (6). Connect the
USB cable to the appliance and the power adapter (not provided) to
the mains socket. During the charging process, the plug symbol (14)
will light up, the charging status will be shown by the battery
level (12). The display (8) will show the battery level in percent
(01, 02, 03, ... ,100 % – in 1 % increments). When the battery is fully
charged, the display will show 100 % and the plug symbol (9) will no
longer be lit up. A fully charged battery provides approx.
70 minutes of cordless use.
The plug symbol will light up stably when the battery is
nearly drained.
To lengthen the service life of the rechargeable battery, use
the appliance regularly and without long storage periods, and
let the rechargeable battery get fully drained before charging it.
Charge the product for 90 minutes before using it for the first time.
Charging
WARNING!
The appliance and the USB cable are not waterproof
and are not recommend to be used in the bathtub or
shower. The appliance must not be charged in the
bathtub/shower.
04 BEFORE USE
EN 6
To Next Page
Loading...