Carrier 09FC020 - Page 20

20
Fig. 19 — 09FC 020-040, 050-080 Series Piping
30XV 140, 160, 180, 225 Standard Tier, 140 Mid Tier
Fig. 20 — 09FC 050-080 Series Piping
30XV 200, 250-500 Standard Tier
160-500 Mid Tier
140-500 High Tier
09FC Unit
Chiller
LWT
(Note 1)
EWT
(Note 1)
09FC
Control
Panel
24" Min
(Note 2)
NOTES:
1. EWT and LWT thermistors must be installed in the field.
Thermistors are supplied inside control panel. Add 1/4 in. NPT hole in pipe for mounting.
LWT thermistor well must be in mixed flow piping.
2. Minimum access is a recommendation. Local code may require increased spacing.
3. Chiller tube service must be done from control panel end for this arrangement. See chiller
certified drawings for details.
09FC Unit
LWT
(Note 1)
EWT
(Note 1)
09FC
Control
Panel
1" Min
(Note 2)
NOTES:
1. EWT and LWT thermistors must be installed in the field.
Thermistors are supplied inside control panel. Add 1/4 in. NPT hole in pipe for mounting.
LWT thermistor well must be in mixed flow piping.
2. Minimum access is a recommendation. Local code may require increased spacing.
3. Chiller tube service must be done from control panel end for this arrangement. See chiller
certified drawings for details.
Chiller