INDEX (cont)
Safety and Operating Controls (Check Monthly), 76
Safety Considerations, 1
Safety Controls, 35
Safety Shutdown, 46
Scheduled Maintenance, 76
Service Configurations (Input), 55
Service Ontime, 76
Service Operation, 44
Set Up Machine Control Configuration, 55
Shaft Seal Oil (Open Drive Machines Only), 36
Shutdown Sequence, 46
Spare Alarm Contacts, 38
Spare Safety Inputs, 38
Standing Vacuum Test, 49
Starter (Check), 54
Starter Management Module (SMM), 96
Starters, 12
Starting Equipment (Inspect), 82
Start the Machine, 61
Start-Up, Before Initial Start-Up, 47
Start-Up Checklist for 17/19EX Centrifugal Liquid Chiller
(Initial), CL-1
Start-Up, Initial Start-Up, 58
Start-Up, Initial Start-Up, Preparation, 58
Start-Up (Prepare the Machine), 61
Start-Up, Required Equipment, 47
Start-Up/Shutdown/Recycle Sequence, 45
Stop the Machine, 61
Surge Prevention Algorithm, 40
Surge Protection, 40
System Components, 4
Temperature Sensors (Checking), 83
Test After Service, Repair, or Major Leak, 67
Tighten All Gasketed Joints and Guide Vane
Shaft Packing, 48
Tightness (Check), 48
Tower-Fan Relay, 39
Transferring Refrigerant, 66
Troubleshooting Guide, 83
Troubleshooting Guide, Overview, 83
Utility Vessel, 8
Utility Vessel and Pumpout System, 47
Water/Brine Reset, 39
Water Leaks, 82
Water Piping (Inspect), 52
Water Treatment, 82
Weekly Maintenance, 75
Wiring (Inspect), 52
Copyright 1996 Carrier Corporation
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 2 2
Tab 5a 5d
PC 211 Catalog No. 531-750 Printed in U.S.A. Form 17/19EX-2SS Pg 116 1197 3-96 Replaces: 17/19EX-1SS
To Previous Page
