35
COMBINATION RATINGS CONTINUED
ARI Ref. No. Model N umber Indoor Model Furnace Model Capacity EER SEER
3631130 24ABC660A**30 CNPV*6124A** 58ME(B,C)120---20 55,000 13.0 16.0
3631427 24ABC660A**30 CNPV*6124A** 58MV(B,C)120---20 55,000 12.5 15.5
3631606 24ABC660A**30 CNPV*6124A** 58PH*090 ---16 55,000 13.0 16.0
3631658 24ABC660A**30 CNPV*6124A** 58PH*110 ---20 55,000 13.0 16.0
3631686 24ABC660A**30 CNPV*6124A** 58PH*135 ---20 55,000 13.0 16.0
3632218 24ABC660A**30 CNPV*6124A** 58UVB120 ---20 55,000 12.5 15.5
3631693 24ABC660A**30 CNPV*6124A** 58VLR120---20 55,000 12.5 15.2
3631698 24ABC660A**30 CNPV*6124A** 58VMR120 ---20 55,000 12.5 15.0
3630664 24ABC660A**30 CSPH*6012A** 58CV(A,X)110 ---20 54,000 12.5 15.5
3630715 24ABC660A**30 CSPH*6012A** 58CV(A,X)135 ---22 54,500 13.0 16.0
3630766 24ABC660A**30 CSPH*6012A** 58CV(A,X)155 ---22 55,000 13.0 16.0
3631057 24ABC660A**30 CSPH*6012A** 58ME(B,C)080---16 54,000 12.5 15.2
3631107 24ABC660A**30 CSPH*6012A** 58ME(B,C)100---20 54,000 13.0 16.0
3631135 24ABC660A**30 CSPH*6012A** 58ME(B,C)120---20 54,500 13.0 16.0
3631428 24ABC660A**30 CSPH*6012A** 58MV(B,C)120---20 54,000 12.5 15.2
3631611 24ABC660A**30 CSPH*6012A** 58PH*090---16 54,000 12.5 15.5
3631663 24ABC660A**30 CSPH*6012A** 58PH*110---20 55,000 13.0 16.0
3631691 24ABC660A**30 CSPH*6012A** 58PH*135---20 54,500 13.0 16.0
3632219 24ABC660A**30 CSPH*6012A** 58UVB120---20 54,000 12.5 15.2
3631697 24ABC660A**30 CSPH*6012A** 58VLR120---20 54,000 12.5 15.2
3631923 24ABC660A**30 CSPH*6012A**+TDR 55,000 12.5 14.5
3631719 24ABC660A**30 FE4ANB006+UI 55,000 13.0 16.0
3631799 24ABC660A**30 FV4BNB006 55,000 13.0 16.0
3631815 24ABC660A**30 FV4CNB006 55,000 13.0 16.0
3631856 24ABC660A**30 FX4CN(B,F)060 55,000 13.0 16.0
3632308 24ABC660A**30 FX4DN(B,F)061 55,500 13.5 16.0
3631886 24ABC660A**30 FY4ANB060 55,000 12.0 14.0
3632315 24ABC660A**30 FY5BNB060 54,500 12.0 14.0
{ Tested combination
EER — Energy Efficiency Ratio
SEER — Seasonal Energy Efficiency Ratio
TDR — Time---Delay Relay. In most cases, only 1 method should be used to achieve TDR function. Using more than 1 method in a system may cause degradation in performance.
Use either the accessory Time---Delay Relay KAATD0101TDR or a furnace equipped with TDR. Most Carrier furnaces are equipped with TDR.
TXV — Thermostatic Expansion Valve
UI — User Interface
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other combinations are determined under DOE
computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are affected.
24ABC6
To Next Page
Loading...
