Carrier 37MUHAQ18AA3 - Basic Remote Control Operation

45MUAAQ: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
12
BASIC REMOTE CONTROL OPERATION
Before operation, ensure the unit is plugged in and power is available.
COOL Mode
Fig. 9 —COOL Mode
1. Press MODE to select the COOL mode.
2. Set your desired temperature using TEMP
˅ or TEMP ˄.
3. Press FAN to select the fan speed in a range of AU‘100%,
4. Press ON/OFF to start the unit.
Setting Temperature
The operating temperature range for units is 60-86°F (16-30°C)/68-82 °F
(20-28°C) (depends on model). You can increase or decrease the set
temperature in 1°F (0.5°C) increments.
HEAT Mode
Fig. 10 —HEAT Mode
1. Press MODE to select the HEAT mode.
2. Set your desired temperature using TEMP
˅ or TEMP ˄.
3. Press FAN to select the fan speed in the range of AU-100%.
NOTE: As the outdoor temperature drops, the performance of your
unit’s HEAT function may be affected. In such instances, we
recommend using this air conditioner in conjunction with
other heating appliances.
AUTO Mode
In AUTO mode, the unit automatically selects the COOL, FAN, or HEAT
operation based on the set temperature.
Fig. 11 —AUTO Mode
1. Press MODE to select AUTO.
2. Set your desired temperature using TEMP
˅ or TEMP ˄.
3. Press ON/OFF to start the unit.
NOTE: FAN Speed can not be set in the AUTO mode.
DRY Mode
Fig. 12 —DRY Mode
1. Press MODE to select the DRY mode.
2. Set your desired temperature using TEMP
˅ or TEMP ˄.
3. Press ON/OFF to start the unit.
1
4
2
3
For Reference
Only
1
4
2
For Reference
Only
3
1
3
2
For Reference
Only
1
3
2
For Reference
Only