7
38AW-
Installation (Fig. 4 - 7)
Drain hose and base pan knockouts (Fig. 7)
See g. 7.
In case of draining through the drain hose, attach the drain
nipple (A) and use the drain hose (Inner diam.: 16mm) sold
on the market. When there is a possibility of freezing of
drain at the cold district or a snowfall area, be careful for
drainage ability of drain.
The drainage ability increases when knockout holes on the
base pan are opened. (Open the knockout hole to outside
using a hammer (B), etc.).
Operating limits
Please refer to the hydronic module manual.
English
To Next Page
Loading...
