Why does my Carrier Air Conditioner compressor run continuously?
If the compressor in your Carrier Air Conditioner runs continuously, first check the temperature selection. If that's not the issue, have a technician check and add refrigerant as needed. It may also be necessary to replace components or drain and recharge the refrigerant. Additionally, make sure there are no obstructions and the filter is clean.
What to do if Carrier Air Conditioner compressor won't start, but outdoor fan is running?
If the compressor of your Carrier Air Conditioner won't start but the outdoor fan is running, have a technician check and repair the system. It may also be necessary to check for the cause and replace the compressor. The issue might also be resolved by replacing a specific component.
How to fix high discharge pressure in Carrier Air Conditioner?
If your Carrier Air Conditioner's discharge pressure is too high, start by cleaning or removing any obstructions. If the problem persists, a component might need replacement, or some refrigerant may need to be drained. In some cases, it might be necessary to drain, evacuate, and recharge the refrigerant.
What to do if Carrier Air Conditioner compressor starts, but stops due to its overtemperature protection?
If the compressor in your Carrier Air Conditioner starts but stops due to overheating, consider these solutions: have a technician drain, evacuate, and recharge the refrigerant. Remove any obstructions that might be restricting airflow. Also, a technician should check the system and conduct necessary repairs or replacements.
How to fix low discharge pressure in Carrier Air Conditioner?
If your Carrier Air Conditioner's discharge pressure is too low, you may need to add refrigerant. Additionally, ensure there are no obstructions and that the filter is clean.
General| Brand | Carrier |
|---|---|
| Model | 38GL2M18G |
| Category | Computer Hardware |
| Language | English |
Details model numbers, types, and power supply compatibility.
Provides instructions for installing the unit, emphasizing safety and compliance.
Emphasizes moisture, dust, and leak-free connections.
Details nitrogen brazing, vacuum creation, and charging methods.
Provides electrical specifications, power input, and wire sizes for models.
Steps to collect system refrigerant into the outdoor unit.
Method for checking and correcting refrigerant charge.
Guides on diagnosing and resolving operational problems.
Explains unit alarms, LED signals, and error codes.
To Next Page
