:
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
3
Fig. 2 — Outdoor Unit
NOTE:
- If the outdoor unit is higher than the indoor unit, prevent rain
from flowing into the indoor unit along the connection pipe by
making a downward arc in the connection pipe before it
enters the wall to the indoor unit. This ensures that rain drips
from the connection pipe before it enters the wall.
- Piping and the interconnecting wiring are field supplied.
- Figure 2 is only a sketch. The actual model may differ slightly.
Table 2 lists the units covered in this document.
Table 2 — Unit Sizes
SYSTEM TONS BTUH
VOLTAGE -
PHASE
OUTDOOR MODEL
1.00 12,000 115-1 38MARBQ12AA1
0.75 9,000 208/230-1 38MARBQ09AA3
1.00 12,000 208/230-1 38MARBQ12AA3
1.50 18,000 208/230-1 38MARBQ18AA3
2.00 24,000 208/230-1 38MARBQ24AA3
2.50 30,000 208/230-1 38MARBQ30AA3
3.00 36,000 208/230-1 38MARBQ36AA3
To Next Page
Loading...
