39
DISASSEMBLY INSTRUCTIONS SIZE 36 (CONT)
3 Electrical
parts
How to remove the
electrical parts.
1) After completing steps
in sections 1 and 2, remove
the compressor connector.
2) Pull out the two blue
wires connected with the
four-way valve.
3) Pull out the condenser
coil temp. sensor (T3)
connectors, outdoor
ambient temp. sensor (T4),
and the discharge temp.
sensor (T5).
ƻ
1
ƻ
2
ƻ
3
To Next Page
Loading...
