When the outdoor pipe temperature is more than 149°F, the unit stops, and unit runs again when the
No
Yes
No
No
Yes
Yes
Condenser High Temperature Protection
Check if the condenser temp.
is higher than 149°F.
Check if the outdoor ambient
temp. is higher than 122°F.
Check if the outdoor unit
ventilation is good.
Check if the outdoor fan
runs properly.
Check if the heat exchanger is dirty.
Replace the outdoor main board.
Refrigerant is low. Add refrigerant.
Check if the refrigerant system is ok.
Clean the heat exchanger.
Refer to the Fan Speed Out of Control
malfunction solution.
Identify the cause and resolve it.
Restore good ventilation.
Stop the unit.
Check if the
condenser temp.
sensor resistance is normal.
Refer to Appendix 1.
Check the
connection between
the temperature sensor
and PCB.
Correct the connection.
Replace the temperature sensor.