To Next PageTo Next PageWhat to do if indoor room temp or evaporator sensor is open circuit or short circuited in Carrier 38MVC?
If the indoor room temperature or evaporator sensor in your Carrier Air Conditioner is open circuit or short-circuited, check the diagnostic codes displayed on the indoor unit first to identify the problem.
What to do if there is an indoor unit communication error (Illuminates simultaneously) in my Carrier Air Conditioner?
If your Carrier Air Conditioner displays an indoor unit communication error (illuminating simultaneously), check the diagnostic codes displayed on the indoor unit first to identify the problem.
What to do if compressor over-current protection has been activated four times in Carrier 38MVC Air Conditioner?
If the compressor over-current protection in your Carrier Air Conditioner has been activated four times, check the diagnostic codes displayed on the indoor unit first to understand the issue.
How to fix indoor fan speed that has been out of control for over 1 minute in Carrier 38MVC?
If the indoor fan speed of your Carrier Air Conditioner has been out of control for more than 1 minute, check the diagnostic codes displayed on the indoor unit first to diagnose the issue.
How to fix EEROM error in Carrier 38MVC Air Conditioner?
If your Carrier Air Conditioner is showing an EEROM error, check the diagnostic codes displayed on the indoor unit first to troubleshoot the issue.
General| SEER | Up to 20.5 |
|---|---|
| Refrigerant | R-410A |
| SEER Rating | Up to 20.5 |
| Voltage | 208-230V |
| Dimensions (Outdoor Unit) | Varies by model |
| Weight (Outdoor Unit) | Varies by model |
Key advantages and solutions offered by the duct-free split system.
Covers sound, security, installation, servicing, reliability, comfort, economy, controls, accessories, and agencies.
Explanation of the indoor unit model coding.
Explanation of the outdoor unit model coding.
Lists the standard features for indoor and outdoor units.
Provides cooling and heating capacity data.
Physical sizes and weights of indoor units.
Physical sizes and weights of outdoor units.
Indicates positions of service valves on outdoor units.
Required spacing for indoor unit airflow.
Required spacing for outdoor unit airflow.
Technical specifications for 38MVC outdoor units.
Technical specifications for 38MVQ outdoor units.
Technical specifications for 40MVC indoor units.
Technical specifications for 40MVQ indoor units.
Continued technical specifications for 40MVQ indoor units.
Performance data for 9K cooling units.
Performance data for 12K cooling units.
Performance data for 12K cooling units (208/230V).
Performance data for 18K cooling units.
Performance data for 18K cooling units (continued).
Performance data for 24K cooling units.
Performance data for 24K cooling units (continued).
Performance data for 24K cooling units (continued).
Heating performance for 9K heat pump units.
Heating performance for 12K heat pump units.
Heating performance for 12K heat pump units (208/230V).
Heating performance for 18K heat pump units.
Heating performance for 24K heat pump units.
Defines operational temperature and humidity ranges.
Details performance in cold conditions.
Describes the system's metering devices.
Guidelines for condensate drainage.
Sizing, insulation, and long-line considerations.
Microprocessor control functions and modes.
Operation via remote.
Information on air circulation distances.
Noise levels measured from units.
Power requirements and electrical specifications.
Overview of functionality, design, and compliance.
Covers general, cabinet, fans, coil, motors, and controls.
Covers electrical requirements, SEER, HSPF, and refrigerant lines.
Optional field-installed features.
Overview of functionality, design, and compliance.
Covers general, cabinet, fans, compressor, coil, and refrigeration components.
Covers operational controls, safeties, and electrical requirements.
Optional field-installed features.
