Carrier 38NYV025M-A User Manual

Item
Operation flow and applicable data, etc.
Description
12. Hi-POWER
([Hi-POWER] button on the remote controller
is pressed)
When [Hi-POWER] button is pressed while the indoor
unit is in Auto, Cooling or Heating operation, Hi-
.
Mode
POWER mark is indicated on the display of the remote
controller and the unit operates as follows.
1. Automatic operation
• The indoor unit operates in according to the
current operation.
2. Cooling operation
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
• The preset temperature drops 1ºC
(The value of the preset temperature on the
3. Heating operation
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
• The preset temperature increases 2ºC
(The value of the preset temperature on the
4. The Hi-POWER mode can not be set in Dry
operation
− 37 −
FILE NO. SVM-07009

Carrier 38NYV025M-A Specifications

General

Model	38NYV025M-A
SEER	Up to 20.5
Refrigerant	R-410A
Phase	1
Type	Heat Pump
Cooling Capacity	24, 000 BTU
Voltage	208-230V
Compressor Type	Inverter
Stages	Variable
Power Supply	208-230V, 60Hz