Carrier 40KQV - Remote Control Display and Protection; Unit Protection Devices Overview

40KQV
GB - 5
ENGLISH
AM
PM
A
B
1
2
F
3
5
7
8
10
12
13
14 15
1
2
4
6
9
11
Display of selected functions
1. Operating mode (from left to right):
• Ventilation (fan only)
• Heating (heat pump models only)
• Automatic (heat pump models only)
• Cooling and dehumidification
• Dehumidification only
2. Signal transmission symbol
3. Temperature selected
4. Address selector
5. Temperature unit of measurement (°C or °F)
6. Unit configuration
7. Batteries exhausted indicator
8. Louvre positioning (Flap)
9. Fan speed
10. Personalisation active
11. ON timer selected
12. Night timer active
13. DAILY timer active (Everyday)
14. ON timer, OFF timer and current time
15. OFF timer selected
Table I: Unit protection devices
WARNING:
During heat pump operation the unit will undergo several defrost cycles to remove ice that might collect on the outdoor unit in very low ambient
temperatures. In these cycles, the indoor fan will be automatically off and cannot operate until defrost cycle is completed.
System Type of protection Effect of protection Operation mode When on
Cold draft prevention Indoor fan off
Heating in
During unit operation
heat pump mode
Heat pump
Defrost cycle Indoor fan off
Heating in
During unit operation
heat pump mode