To Next PageTo Next PageWhat to do if indoor room temp or evaporator sensor is open circuit or short circuited in Carrier 40MVC Air Conditioner?
If the indoor room temperature or evaporator sensor in your Carrier Air Conditioner is open circuit or short-circuited, check the diagnostic codes displayed on the indoor unit first to identify the problem.
What to do if there is an indoor unit communication error (Illuminates simultaneously) in my Carrier 40MVC?
If your Carrier Air Conditioner displays an indoor unit communication error (illuminating simultaneously), check the diagnostic codes displayed on the indoor unit first to identify the problem.
What to do if compressor over-current protection has been activated four times in Carrier Air Conditioner?
If the compressor over-current protection in your Carrier Air Conditioner has been activated four times, check the diagnostic codes displayed on the indoor unit first to understand the issue.
How to fix indoor fan speed that has been out of control for over 1 minute in Carrier Air Conditioner?
If the indoor fan speed of your Carrier Air Conditioner has been out of control for more than 1 minute, check the diagnostic codes displayed on the indoor unit first to diagnose the issue.
How to fix EEROM error in Carrier Air Conditioner?
If your Carrier Air Conditioner is showing an EEROM error, check the diagnostic codes displayed on the indoor unit first to troubleshoot the issue.
General| Brand | Carrier |
|---|---|
| Model | 40MVC |
| Category | Air Conditioner |
| Language | English |
Highlights key advantages and innovative solutions offered by the duct-free split systems.
Discusses the quiet operation of the indoor units and the reasons behind it.
Details the ease and speed of installation for the duct-free split systems.
Describes the design features that ensure long-term, trouble-free operation.
Explains how the system provides personalized comfort control for each space.
Details the energy-saving aspects and cost-effectiveness of the system.
Explains the coding system for identifying indoor unit models and their specifications.
Details the cooling capacities of the 38MVC/MVQ series units under various conditions.
Provides instantaneous and integrated heating performance ratings for different operating conditions.
Offers guidance on selecting the appropriate unit based on load and operational needs.
Provides guidelines for sizing refrigerant lines, including insulation and burial considerations.
Describes the microprocessor-based control system and its operating modes.
Defines the general characteristics, capabilities, and requirements for indoor duct-free units.
Describes the basic system configuration and components of the duct-free split units.
Outlines the microprocessor-based control system, its functions, and operating ranges.
States the minimum SEER and HSPF ratings required for the system.
Defines the general characteristics and requirements for horizontal discharge outdoor units.
Outlines the factory-selected controls and safety features for the outdoor units.
