23
Fig. 26 — Quarter Round Stator Retention Brackets
Fig. 27 — Fan Assembly, Side Panel Access
(Side Panel Removed)
Disassembling Motor and Fan Assembly
See Fig. 28 for 2.4 Hp motor units; see Fig. 29 for 3 Hp motor
units.
1. Remove the four bolts that hold the orifice ring to the stator.
2. Remove the orifice ring from the stator
3. Remove three screws from the top of the fan rotor.
4. Remove the rotor from the motor.
5. Remove the four screws connecting the motor to stator
flange.
6. Remove stator from motor.
7. If required, remove stator limit switch on the stator.
Fig. 28 — Fan Assembly for Units with 2.4 Hp Motor
Quarter Round Stator
Retention Brackets
1
2
3
4
5
6
7
To Next Page
Loading...
