To Next PageTo Next Page
Need help?Do you have a question about the Carrier 42 SERIES and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Voltage | 208/230V |
| Sound Pressure Level (Indoor) | Not Available |
| Operating Temperature Range (Cooling) | Not Available |
| Weight (Outdoor Unit) | Vary by model |
| Indoor Unit Type | Wall Mounted |
Control options for 2-pipe heating and cooling fan coil systems.
Control options for fan coil units with electric heat.
Control options for 4-pipe fan coil systems.
Wiring for thermostatic fan control in 2-pipe systems.
Superior control using a thermostatically controlled 2-position valve.
System provides complete heating, cooling available individually.
Used for heating between seasons or during cooling.
TC-126 thermostat for heating/cooling on line voltage.
TH-126 thermostat for 4-pipe systems with electric heat.
Thermostat with manual 3-speed fan switch and ON-OFF switch.
Thermostat with manual 3-speed fan switch and ON-OFF switch.
Unit-mounted switch with OFF, HIGH, MED, LOW positions.
Combines thermostat with toggle switch for fan control.
Unit-mounted thermostat and 3-speed switch in one box.
Thermostat for sequenced heating/cooling with 6-degree separation.
Senses water temperature for cycle changes.
Limitations on pneumatic valves, quantities, and types.
Electric 2-position valve that opens and closes.
Valve with bypass for system temp sensing by aquastat.
Illustrates pneumatic valve package arrangements, including legend and notes.
Electric 2-position flow control valve with manual override.
Electric 3-way flow control valve with manual override.
Pneumatically operated 2-way control valve.
Pneumatically operated 3-way control valve.
