70
General notes
1. Shown performances are valid under the following conditions:
a) indoor / outdoor tubing length 6 m
b) indoor / outdoor unit level difference O m
c) indoor fan running at high speed
2. Correction factors for different tubing length and / or different indoor fan speed
are shown in Table 1, Table 2a and 2b.
Please see the installation manual of the outdoor unit for the maximum
allowed tubing length.
3. Interpolation of shown data is allowed.
4. Extrapolation of shown data is not allowed.
5. Shown Total Sensible Capacity SHC are based on indoor coil entering air dry bulb
temperature 27 °C, as per ISO 5151.
6. Correction factors for different air temperature are shown in Table 3.
7. Cooling and heating capacities include the heat generated by the indoor fan motor.
Legend
BF = Bypass factor
EWB = Indoor air wet bulb temperature (indoor coil inlet) °C
KW = Total input power kW
SHC = Total sensiblecapacity kW
TC = Total cooling capacity kW
TH = Total heating capacity kW
THI = Integrated heating capacity kW
To Next Page
Loading...
