− 12 −
FILE NO. SVM-10036
5. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
6. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or stop
without using the remote control.
• Operation mode is set on AUTOMATIC
operation, preset temperature is 24°C
and fan operation is automatic speed.
7. TIMER OPERATION
Setting the ON Timer Setting the OFF Timer
Press : Set the desired ON timer.
Press : Set the desired OFF timer.
Press : Set the timer. Press : Set the timer.
Press : Cancel the timer. Press
Press
: Set the ON timer.
Press .
Press
: Set the OFF timer .
Press button during the ( or )
mark flashing.
1
1
2
3
2
3
3
4
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
· During the daily timer is activation, both arrows are indicated.
( or )
ON
OF F
: Cancel the timer
ON
OF F
8. PRESET OPERATION
Set your preferred operation for future use. The setting will be memorized by the
Note:
· Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
· The setting will be saved for the next same operation.
unit for future operation (except air flow direction).
1. Select your preferred operation.
2. Press and hold for 3 seconds to memorize the setting. The mark
displays.
3. Press : Operate the preset operation.
To Next Page
Loading...
