78
APPENDIX A: SystemVut Controller Display
Run Status Main Menu Layout (cont)
Display Text Expanded Text Range Units Default Point
OCCUPANCY OCCUPANCY DATA
OCCUPIED NOW Currently Occupied Yes/No Forcible OCCUPIED
MINS UNTIL OCC Mins until next occupied xxxxx min MINTILOC
ACTIVE OCC CTRL Active Occupancy control 0=24/7 OCC,
1=SCHEDULE,
2=BAS CTRL,
3=REMOC CTL,
4=TIME OVRD,
5=LINKAGE,
6=FORCED
OCC_CTRL
LINKAGE OCC REQ Linkage Occupied Request 0=Unocc,
1=Occupied,
2=Disabled
LNK_OCC
TIMEDOVRDREMAIN Timed Override Remaining 0 t o 240 min Forcible OVR_EXT
REMOTE OCC SWITCH Remote Occupancy Switch On/Off Forcible REMOCC
BMS OCC REQUEST BMS Occupancy Request 0=UNOCC,
1=OCCUPIED,
2=DISABLED
Forcible BMS_OCC
L OCAL OCC REQUEST Local Sched Occ Request 0=Unocc,
1=Occupied
Forcible LOC_OCC
ACTIVE PERIOD Active Schedule period 0to8 PER_NO
HOLIDAY TOMORROW? Tomorrow Is A Holiday Yes/No HOL_TMRW
HOLIDAY TODAY? Today Is A Holiday Ye s/No HOLTODAY
NEXT OCC DAY Next Occupied Day DDD NXTOCDAY
NEXT OCC TIME Next Occupied Time hh:mm NXTOCTIM
NEXT UNOCC DAY Next Unoccupied Day DDD NXTUNDA Y
NEXT UNOCC TIME Next Unoccupied Time hh:mm NXTUNTIM
PREV UNOCC DAY Previous Unccupied Day DDD PRVUNDAY
PREV UNOCC TIME Previous Unoccupied Time hh:mm PRVUNTIM
Settings Main Menu Layout
Display Text Expanded Text Range Units Default Point
SETTINGS Settings Menu
SPACE SET POINTS Space Setpoints Adjustment Menu
OCC COOL SETPOINT Occupied Cool Setpoint 55 to 80 °F 78 OC SP
OCC HEAT SETPOINT Occupied Heat Setpoint 55 to 80 °F 68 OHSP
UNOCC COOL SETPNT Unoccupied Cool Setpoint 65 to 95 °F 85 UCSP
UNOCC HEAT SETPNT Unoccupied Heat Setpoint 40 to 80 °F 60 UHSP
H E A T --- C O O L S P G A P Heat ---Cool Setpoint Gap 2to10 ^F 5 HCSP_GAP
SPT SLIDER RANGE SPT Offset Range (+/--- ) 0to5.0 °F 5 SPTO_RNG
OCC SPRH SET PT Occupied SPRH Setpoint 0 to 100 % 55 SPRH_OSP
UNOCC SPRH SET PT Unoccupied SPRH Setpoint 0 t o 100 % 55 SPRH_USP
SA TEMPER SET PNT SA tempering Set point xx °F 50 SATEMPSP
TEMP DEMAND CONFIG Temperature Demand Configuration menu
LOW COOL DMD ON Low Cool Demand On --- 1 t o 2 . 0 °F 0.5 DMDLCON
MEDCOOLDMDON Medium Cool Demand On 0.5 to 20.0 °F 1 DMDMCON
HIGH COOL DMD ON High Cool Demand On 0.5 to 20.0 °F 2 DMDHCON
LOW COOL DMD OFF Low Cool Demand Off --- 1 t o 2 . 0 °F --- 0 . 5 DMDLCOFF
COOL DMD LEVEL UP Cool Demand Level Up --- 2 t o 2 . 0 ^F/min --- 0 . 2 CDMD_LUP
LOW HEAT DMD ON Low Heat Demand On --- 1 t o 2 . 0 °F 0.5 DMDLHON
HIGH HEAT DMD ON High Heat Demand On 0.5 to 20.0 °F 2 DMDHHON
LOW HEAT DMD OFF Low Heat Demand Off --- 1 t o 2 . 0 °F --- 0 . 5 DMDLHOFF
HEAT DMD LEVEL UP Heat Demand Level Up --- 2 t o 2 . 0 ^F/min --- 0 . 2 HDMD_LUP
DEMAND TIMEGUARD1 Space Demand Time Guard1 60 to 600 sec 180 TDMD_TG1
DEMAND TIMEGUARD2 Space Demand Time Guard2 0 to 600 sec 300 TDMD_TG2
DEMAND TIMEGUARD3 Space Demand Time Guard3 5 to 120 min 10 TDMD_TG3
DMD LIMIT CONFIG DEMAND LIMIT CONFIG
COOL DMD LIM LEV1 Cool DMD Offset level 1 0t099 °F 1 CLDOLEV1
COOL DMD LIM LEV2 Cool DMD Offset level 2 0t099 °F 3 CLDOLEV2
COOL DMD LIM LEV3 Cool DMD Offset level 3 0t099 °F 5 CLDOLEV3
HEAT DMD LIM LEV1 Heat DMD Offset level 1 0t099 °F 1 HTDOLEV1
HEAT DMD LIM LEV2 Heat DMD Offset level 2 0t099 °F 3 HTDOLEV2
HEAT DMD LIM LEV3 Heat DMD Offset level 3 0t099 °F 5 HTDOLEV3
CL OCK Clock Adjustment Menu
TIME Clock Hour and Minute xx:xx hh.mm TIME
DATE Current Date MM/DD/YYYY DATE
DAYLIGHT SAVINGS Daylight Savings Configuration Menu DST Menu
DA YLIGHT SAVINGS? DST allowed? Enable/Disable Enable DST_CFG
To Next Page
Loading...
