105
APPENDIX D: SystemVut Controller CCN Tables
Maintenance Tables (cont)
TABLE DISPLAY NAME VALUES UNITS POINT NAME WRITE STATUS
OCC_DIAG
Currently Occupied Yes/No OCCUPIED Forcible
Active Occupancy control 0to6 OCC_CTRL
0=24/7OCC
1=Schedule
2=BASCTRL
3=REMOCCTL
4 = Time Override
5=Linkage
6=Forced
Linkage Occupied Request 0=Unocc,
1=Occupied,
2=Disabled
LNK_OCC Forcible
Timed Override Hours 0 to 240 min OVR_EXT Forcible
Remote Occupancy Switch On/Off REMOCC Forcible
BMS Occupancy Request 0to2 BMS_OCC Forcible
0 = Unoccupied
1 = Occupied
2=Disabled
Local Sched Occ Request 0to1 LOC_OCC Forcible
0 = Unoccupied
1 = Occupied
Active Schedule period 0to8 PER_NO
Mins until next occupied --- 1 to 10080 min MINTILOC
BACnetCal Object Status CAL OBJST
Today Is A Holiday Ye s/No HOLTODAY
Tomorrow Is A Holiday Yes/No HOL_TMRW
Next Occupied Day DDD NXTOCDAY
Next Occupied Time hh:mm min NXTOCTIM
Next Unoccupied Day DDD NXTUNDA Y
Next Unoccupied Time hh:mm min NXTUNTIM
Previous Unoccupied Day DDD PRVUNDAY
Previous Unoccupied Time hh:mm min PRVUNTIM
blank
Accept Global Holidays? Yes/No HOLIDAYT
Global Schedule Broadcst Yes/No CCN_GSBC
CCN Schedule Number 0to99 SCHEDNUM
0 = Always Occupied
1 --- 6 4 = L o c a l S c h e d u l e
65--- 99 = Global Schedule
Remote Occupancy Channel 0=None,
1=MBB DI12,
2=MBB DI13,
3=MBB DI14,
4=MBB DI02,
5=MBB Y3
RMOCCHAN
Remote Occupancy Switch On/Off REMOCC Forcible
Timed Override Duration 0to4 hrs OTL_CFG
BAS Protocol Select 0=NONE,
1=CCN,
2=BACNET
BMS_CFG
HW_IO
0=None
1=IAQ
2=OARH
3 = RARH
4=OAQ
5=SPRH
6=OACFM
Assigned AI06 Function 0to6 MBBAI06F
Assigned AI07 Function 0to6 MBBAI07F
Assigned AI08 Function 0to6 MBBAI08F
To Next Page
Loading...
