Carrier 51QPD009N Series - Preparing for Operation; Installing The Exhaust Hose

3.1 INSTALLING THE EXHAUST HOSE
GB-6
The unit should be placed on a firm foundation to minimize noise and vibration. Make sure the floor is strong
enough to support the unit.
Never place any obstacles around the air inlet or outlet of unit.
CAUTION
3.3.1 Window slider kit installation
3. PREPARING FOR OPERATION
B
A
Clearance from other obstracles
A:30cm-100cm
B:≥30cm
bolt
Window slider kit
Minimum: 67.5cm
Maximum: 123cm
Seal sponge
Seal sponge
Window slider kit
Seal sponge
Seal the gap between
window sashes
How to install the window slider kit
Seal sponge
Seal sponge
Window slider kit
Seal sponge
Seal the gap between
window sashes
OR