1
59SC2A
Comfo rt ™ Series Single---Stag e
4 --- W a y M u l t i p o i s e
Co ndensing Gas Furnac e
Series 100
Product Data
A11263
The 59SC2 Multipoise Comfort Series Condensing Gas Furnace
features energy efficiency of 92.1% AFUE gas efficiency and
workhorse PSC blower motor. This gas furnace also features
4--way multipoise installation flexibility, and is available in eight
model sizes. The 59SC2 can be vented for direct vent/two--pipe,
ventilated combustion air, or single--pipe applications. All units
meet California Air Quality Management District emission
requirements, are design certified in Canada, and are certified for
mobile/manufactured home use.
STANDARD FEATURES
S 4--Way multipoise design for upflow, downflow or horizontal
installation.
S Installation flexibility with a 360--degree rotating elbow.
S More than twelve different venting options, including optional
through--the cabinet downflow and horizontal venting.
S Ideal condensing furnace height 35” cabinet: short enough for
taller coils, but still allows enough room for service.
S Silicon Nitride Power Heatt Hot Surface Igniter.
S Aluminized--steel primary heat exchanger.
S Stainless steel condensing secondary heat exchanger.
S High--quality corrosion--resistant prepainted steel cabinet with
hemmed edges for safety.
S Factory--configured ready for upflow applications.
S Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.
S PSC blower motor, single--speed inducer motor, and
single--stage gas valve.
S Self--diagnostics with SuperBrite LED.
S Approved for Twinning applications (60--14 through 120--60
sizes, only)
S Propane convertible (see accessory list).
S Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.
S Convenient Air Purifier and Humidifier connections.
S Residential installations may be eligible for consumer financing
through the Retail Credit program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.
LIMITED WARRANTY*
S 10 year parts and 20 year heat exchanger limited warranty to the
original purchaser upon timely registration.
S Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.{
* For owner occupied, residential applications.
{Jurisdictions where warranty benefits cannot be conditioned on registra-
tion will receive registered limited warranty benefits.
D
E
S
I
G
N
C
E
R
T
I
F
I
E
D
CERTIFIED
To Next Page
Need help?
General