105
Fig. 50 — Securing Fan and Coil Sections Together
LOCK NUT
LOCK WASHER
FLAT WASHER
STUD
2-IN. GASKET
FACTORY-INSTALLED
AROUND PERIMETER
OF FRAME FLUSH TO
OUTSIDE EDGE
OVERLAPPED 1/8 IN.
TORQUE 4-6 FT-LB
DETAIL A
SEE DETAIL A
a39-4248
TURNING PLENUM
(FIELD STACKED)
SCREW THE BASE RAIL OF THE TOP UNIT
TO THE TOP FRAMERAIL OF THE BOTTOM UNIT
a39-4532
Fig. 51 — Stacked Turning Plenum
NOTE: Two turning plenums are needed to make
the stacked configuration. Screw the baserail of
the top unit to the top framerail of the bottom unit.
To Next Page
Loading...
